Solar Power 10W 12V Polycrystalline Solar Panel, Charger with 2 Alligator Clips - Worldwide Free Delivery

Sale
$100.00
$84.00

Specifications:

10W 12V PolyCrystalline Cells Solar Panel:
-High efficiency and excellent performance
-It comes with block diode stop reverse discharge
-Provided with 2 alligator clips and 4m cable
-Suitable for a variety of equipments, emergency lights, advertising lights, traffic lights, electric fans, solar water pumps, motorbike, boat, etc..
Power: 10W
Voltage: 12V
Material: PolyCrystalline Transparent Epoxy Resin
Weight: 267g
Dimensions: 38 x 22cm LxW
Cable Length: Approx. 4m38 x 22cm ,3m340x250x17mm

10A 12V/24V Solar Controller :
-Overcharging protection.
-Can be used for all panels.
-Overdischarging protection.
-Short and Open Circuit protection.
-Advanced design with simple plug and play technology.
-No need for complicated adjustments.
Color : Black
Size : 14 x 8.8 x 2.5cm
Rated charge current : 10A
Rated load current : 10A
Work voltage : 12/24V
Over load, short circuit protection : 1.25 rated load current 60sec,
1.5 rated loads current 5sec,
over load protection action. ≥3 Rated load current short
circuit protection action.
No load current : ≤6mA
Charging circuit voltage drop : ≤0.26 V
Load circuit voltage drop : ≤0.15 V
Over voltage protection : 17V; ×2/24V
Work temperature Industry stage :-35℃ to 55℃
Boost charge voltage : 14.6V, ×2/24V keep 10min
Direct charge voltage : 14.4V, ×2/24V keep 10min
Float charge voltage : 13.6V, ×2/24V
charge return voltage : 13.2v,×2/24V
Temperature compensation : -5mv/℃/cell Boost charge, Direct charge, Float charge, charge return voltage
Lower voltage indicate : 12.0V, ×2/24V
Over discharge voltage : 11.1Vno load- real-time modified voltage by the discharge rate, ×2/24V
Over discharge return voltage : 12.6V, ×2/24V
Control mode : PWM charge mode, modified discharge voltage by the discharge rate

How To Use :

1. Digital LED display shows the 16 lighting options by switch with 5 seconds
2. Number display,0 to 7, DC output.
3. Number display,0. to 7. 1Hz output.
4. Digital LED stop flash to confirm correct switch selection.
5. 10 minutes delay to make sure its realy dark.

You recently viewed

Clear recently viewed